Product Name：MRIL-P MAGNETIC RESONANCE IMAGING TOOL
|
Type：
|
MRIL-P
|
|
producer：
|
Huanding Energy Services
|
|
Description：
|
The Magnetic Resonance Imaging Logging (MRIL) tool is a centralized tool that provides porosity and other petrophysical parameters related to the overall productivity of hydrocarbons in the downhole environment. The tool does this by measuring hydrogen atoms located within a thin-walled, cylindrical-volume concentric to the axis of the tool. The main components of the tool consists of a strong permanent magnet, which produces a gradient magnetic field used to polarize hydrogen atoms, and an antenna which both transmits a Radio Frequency (RF) signal and receives an echo response.
|
FunctionCompositionMRIL-P SpecificationsMRIL_P Specifications
The Magnetic Resonance Imaging Logging (MRIL) tool is a centralized tool that provides porosity and other petrophysical parameters related to the overall productivity of hydrocarbons in the downhole environment. The tool does this by measuring hydrogen atoms located within a thin-walled, cylindrical-volume concentric to the axis of the tool. The main components of the tool consists of a strong permanent magnet, which produces a gradient magnetic field used to polarize hydrogen atoms, and an antenna which both transmits a Radio Frequency (RF) signal and receives an echo response.
Composition
? MRIL-PRIME includes three main parts:
l D series Sonde (MRSN)
l D series Electronic Circuit (MREC)
l D series capacitor (MRCC)
? MRIL sonde includes three parts:
l A strong ferrite magnets (main magnet);
l Two stronger magnetic stratum polarization samarium - cobalt permanent magnets;
l RF antenna embedded in the shell of FRP probe.
? MREC includes the following parts:
l Transmission circuit;
l Receiving circuit;
l Circuit to control, calibrate the instruments and do the data communication;
l Supply circuit.
? MRCC provides the extra energy storage function, such as:
l Filter circuit, used to eliminate the interference between MRIL data acquisition and DITS communication;
l Relay on the eliminator, used to solve compatible problems of auxiliary power supply between MRIL and other DITS tools under the supply of W2
Magnetic Resonance Imaging Logging Tool,
MRIL-P with 6 Inch Sonde
DIMENSIONS AND RATIGS
|
Maximum working temperature: 350oF/177oC
|
|
Maximum working pressure : 20,000 psi
|
|
Maximum torque limit: 1000 ft-lbs
|
|
Maximum compression limit: 37,000 lbs
|
|
Maximum tension limit: 32,000 lbs
|
|
Sonde OD
|
Length
|
Weight
|
|
6 in.
|
52.88 feet
|
1475 lbs
|
BOREHOLE CONDITIONS
|
Tool diameter
|
Borehole Size
|
|
Minimum
|
Maximum
|
|
6in.
|
7 in.
|
16in.
|
|
Open/Cased hole: Open hole only
|
|
Borehole fluids: No restrictions - any type drilling mud or air
|
|
Rugosity effect: No effect if not in sensitive volume
|
|
Mudcake effect: None, if not in sensitive volume
|
|
Mud res. lower limit: 0.02 Ohm*m (with proper fluid excluder)
|
|
Tool position:
|
1. Ideal when centerline of tool is close to center line of borehole, +/- 0.5 inch.
2. Centralizers and standoffs are required to provide proper centralization.
|
HARDWARE CHARACTERISTICS
|
Signal Type: Magnetic resonance signal,
500KHz - 800KHz
|
|
Sensor Type: Tuned RF coil, permanent magnet
|
|
Sampling Rate: Variable by application and/or user
|
|
Telemetry System: DITS Combinable and DITS
|
|
Combinability: TBD
|
MEASUREMENT
|
|
Principle
|
MeasurementRange
|
|
Porosity:
|
MagneticResonance
|
0-100 PU
|
|
Free Fluid Index:
|
MagneticResonance
|
0-100 PU
|
|
BulkVolumeIrreducible:
|
MagneticResonance
|
0-100 PU
|
|
T2 Distribution
|
MagneticResonance
|
0.5msec-0.3sec
|
|
Accuracy: +/- 1 PU or 5 % whichever is greater
|
|
Repeatability: 1 PU Standard deviation on porosity measurement
|
|
Vertical Resolution:
6 feet in standard mode
4 feet in high resolution mode
2 feet in stationary mode
|
ELECTRICAL SPECIFICATIONS
|
Cablehead Voltage: 120 VAC +/- 18 VAC at 60 Hz
|
|
Instrument Current: 400 mA
|
|
Transmitter Power: < 1.5 KW average
|
|
Transmitter Voltage: +/- 300 VDC at cablehead
|
|
Transmitter Current: 3 A maximum
|
Minimum Rm Limits
|
Fluid
Exclude OD (inches)
|
Borehole Size (inches)
|
Minimum Rm (ohm-m)
|
|
6.875
|
7.875
|
0.02
|
|
6.875
|
8.5
|
0.025
|
|
7.25
|
8.5
|
0.02
|
|
7.25
|
9.625
|
0.035
|
|
7.25
|
10.75
|
0.05
|
|
7.25
|
12.25
|
0.065
|
|
9.0
|
10.75
|
0.02
|
|
9.0
|
12.25
|
0.04
|
Note: These values are based on using 4-wire power delivery and a maximum of 25,000 feet of cable.
Magnetic Resonance Imaging Logging Tool,
MRIL-P with 4 7/8 Inch Sonde
DIMENSIONS
AND RATIGS
|
Maximum working temperature: 350oF/177oC
|
|
Maximum working pressure : 20,000 psi
|
|
Maximum torque limit: 1000 ft-lbs
|
|
Maximum compression limit: 37,000 lbs
|
|
Maximum tension limit: 32,000 lbs
|
|
Sonde OD
|
Length
|
Weight
|
|
4 7/8 in.
|
50.38 feet
|
1275 lbs
|
BOREHOLE CONDITIONS
|
Tool diameter
|
Borehole Size
|
Maximum
|
Maximum
|
|
4 7/8"in.
|
5.75 in.
|
6.5 in.
|
|
Open/Cased hole: Open hole only
|
|
Borehole fluids:
No restrictions - any type drilling mud or air
|
|
Rugosity effect: No effect if not in sensitive
volume
|
|
Mudcake effect: None, if not in sensitive
volume
|
|
Mud res. lower limit: 0.02 Ohm*m (with proper fluid excluder)
|
|
Tool position:
|
1. Ideal when centerline of tool is close to center line
of borehole, +/- 0.5 inch.
2. Centralizers and
standoffs are required to provide proper centralization.
|
HARDWARE CHARACTERISTICS
|
Signal Type: Magnetic resonance signal,500KHz - 800KHz
|
|
Sensor Type:
Tuned RF coil, permanent magnet
|
|
Sampling Rate:
Variable by application and/or user
|
|
Telemetry System:
DITS Combinable与DITS
|
|
Combinability: TBD
|
MEASUREMENT
|
|
Principle
|
MeasurementRange
|
|
Porosity:
|
MagneticResonance
|
0-100 PU
|
|
Free Fluid Index:
|
MagneticResonance
|
0-100 PU
|
|
BulkVolumeIrreducible:
|
MagneticResonance
|
0-100 PU
|
|
T2 Distribution
|
MagneticResonance
|
0.5msec-0.3sec
|
|
Accuracy:
+/- 1 PU or 5 % whichever is greater
|
|
Repeatability: 1 PU Standard deviation on porosity
measurement
|
|
Vertical Resolution:
6 feet in standard mode
4 feet in high resolution mode
2 feet in stationary mode
|
ELECTRICAL SPECIFICATIONS
|
Cablehead Voltage: 120 VAC +/- 18 VAC at 60 Hz
|
|
Instrument Current: 400 mA
|
|
Transmitter Power: < 1.5 KW average
|
|
Transmitter Voltage: +/- 300 VDC at cablehead
|
|
Transmitter Current: 3 Amaximum
|
Minimum Rm Limits
|
Borehole Size (inches)
|
6
|
|
Minimum Rm (ohm-m):
|
0.012
|
Note: These
values are based on using 4-wire power delivery and a maximum of 25,000 feet of
cable.